IWF WEIGHTLIFTING COMPETITION BAR(MEN)

ITEM LPLP8314

PERFORMANCE WEIGHTLIFTING BAR(MEN)

ITEM LPLP8315

IPF POWERLIFTING COMPETITION BAR

ITEM LPLP8370

TEXAS DEADLIFT BAR

ITEM LPLP8371

HYBIRD POWER BAR(MEN)

ITEM LP8316

IWF WEIGHTLIFTING COMPETITION BAR(WOMEN)

ITEM LPLP8317

PERFORMANCE WEIGHTLIFTING BAR(WOMEN)

ITEM LPLP8318

HYBIRD POWER BAR(WOMEN)

ITEM LPLP8319

URETHANE COMPETITION COLORED BUMPER PLATE

ITEM LP8021

-Precision casting
-Large hard chrome hubs
-Premium urethane surface coating
-Diameter: 450mm(IWF standard)
-Diameter of holes:50mm
-Fall test: 30,000 times

MAGNETIC BARBELL COLLARS

ITEM LP8099

-Nylon material has good wear resistance and is durable
-Diameter is 50mm
-Locking protection safety
-Material: Nylon+TPR
-Weight: 123g×2pcs
-Size: 9.5×9.8×3.8cm

URETHANE BARBELL

ITEM LP8010

This polyurethane dumbbell is made of alloy steel that is completely pressed into each solid steel head and welded onto the outside for maximum strength. This avoids damage and any needed secondary maintenance. This fixed weight dumbbell is covenant because you do not need to spend the time to place them back into the holder. You do not need to worry about them being loose and you can exercise more stably and safely. The heads are wrapped with a polyurethane layer of 8mm, are shock absorbent, and impact resistant. It better protects the floor and surrounding equipment.There is a medium level knurling design on the surface of the grip that improves grip and comfort. Even if the palms of your hands are sweaty during exercise, you can still firmly hold these dumbbells. The dumbbell’s hard chrome treatment is not only beautiful but also corrosion resistant. They are durable and a good choice for commercial or household use.

Features:
» The weight blocks are welded to the handle.
» High-quality knurling for optimal grip.
» 5,0 kg weight gradation from 10.0 – 30,0 kg.
» Weight variation with a tolerance of +/-1%.

Material:
» Handle: Steel, hard chrome-plated.
» Weight block: steel with polyurethane coating

Dimensions:
» Handle diameter: 32,5 mm
» inner handle dimension: 892,0 mm
»Colour: black

Item Weight
LP8010-10 10,0 kg
LP8010-15 15,0 kg
LP8010-20 20,0 kg
LP8010-25 25,0 kg
LP8010-30 30,0 kg

EZ CURL URETHANE BARBELL

ITEM LP8011

The premium polyurethane curved barbell was produced according to the latest state of the art. The high quality pure polyurethane has an elasticity which is very insensitive and resistant to abrasion, chipping and any kind of external influences such as scratches or impacts. The material of the pure polyurethane is liquid when heated and can be produced in every imaginable colour according to customer specifications. Polyurethane, also called CPU, is absolutely odourless and more durable than a barbell with a rubber coating.

Features:

» The weight blocks are welded to the handle.
» High-quality knurling for optimal grip.
» 5,0 kg weight gradation from 10.0 – 30,0 kg.
» Weight variation with a tolerance of +/-1%.
» Material: » Handle: Steel, hard chrome-plated.
» Weight block: steel with polyurethane coating

Dimensions:
» Handle diameter: 32,0 mm
» inner handle dimension: 870,0 mm
» Colour: black / blue

Item Weight
LP8011-10 10,0 kg
LP8011-15 15,0 kg
LP8011-20 20,0 kg
LP8011-25 25,0 kg
LP8011-30 30,0 kg

12-SIDED URETHANE BARBELLS

ITEM LP8012

The material of the straight barbell with the urethane coating is a kind of relative of pure polyurethane. Here a certain amount of plastic has been added. Both materials differ slightly in quality and specification, only the price makes the difference. The material of the urethane is very viscous when heated and can only be processed with enormous pressure. Every imaginable colour is possible according to customer specifications. This urethane, also called TPU, is absolutely odourless and more durable than a barbell with a rubber coating. The 12-cornered design is stylish and comfortable at the same time, because it prevents the barbell from rolling away on the floor.

Features:
» The weight blocks are welded to the handle.
» High-quality knurling for optimal grip.
» 5,0 kg weight gradation from 10.0 – 30,0 kg.
» Weight variation with a tolerance of +/-1%.

Material:
» Handle: Steel, hard chrome-plated.
» Weight block: steel with polyurethane coating

Dimensions:
» Handle diameter: 32,0 mm
» inner handle dimension: 870,0 mm
» Colour: blackg

Item Weight
LP8012-10 10,0 kg
LP8012-15 15,0 kg
LP8012-20 20,0 kg
LP8012-25 25,0 kg
LP8012-30 30,0 kg

12-SIDED EZ CURL URETHANE BARBELL

ITEM LP8013

The material of the curved barbell with the urethane coating is a kindred relation of pure polyurethane. Here a certain amount of plastic has been added. Both materials differ slightly in quality and specification, only the price makes the difference. The material of the urethane is very viscous when heated and can only be processed with enormous pressure. Every imaginable colour is possible according to customer specifications. This urethane, also called TPU, is absolutely odourless and more durable than a barbell with a rubber coating. The 12-cornered design is stylish and comfortable at the same time, because it prevents the barbell from rolling away on the floor.

Features:
» The weight blocks are welded to the handle.
» High-quality knurling for optimal grip.
» 5,0 kg weight gradation from 10.0 – 30,0 kg.
» Weight variation with a tolerance of +/-1%.

Material:
» Handle: Steel, hard chrome-plated.
» Weight block: steel with polyurethane coating

Dimensions:
» Handle diameter: 32,0 mm
» inner handle dimension: 870,0 mm
» Colour: black

Item Weight
LP8013-10 10,0 kg
LP8013-15 15,0 kg
LP8013-20 20,0 kg
LP8013-25 25,0 kg
LP8013-30 30,0 kg

URETHANE GRIP PLATE

ITEM LP8020

The premium polyurethane Olympia weight plate was produced according to the latest manufacturing standards. The high quality pure polyurethane has an elasticity which is very insensitive and resistant to abrasion, chipping and any kind of external influences such as scratches or impacts. The material of the pure polyurethane is liquid when heated and can be produced in every imaginable colour according to customer specifications. Polyurethane, also called CPU, is absolutely odourless and more durable than a dumbbell with a rubber coating.

Features:
» 3-handle design for easy handling.
» 50.5 mm stainless steel ring.
» Silk matt surface with high-end finish.
» Weight deviation with a tolerance of +/-1%.
» Available in weight sizes 1.25 / 2.5 / 5.0 / 10.0 / 15.0 / 20.0 and 25,0 kg.

Material: steel with polyurethane coating
Colour: black / blue

Item weight Item weight
LP8020-1.25 1,25 kg LP8020-15 15, 0 kg
LP8020-2.5 2,5   kg LP8020-20 20,0 kg
LP8020-5 5,0   kg LP8020-25 25,0 kg
LP8020-10 10,0 kg

12-SIDED URETHANE GRIP PLATE

ITEM LP8023

The 12-cornered premium polyurethane Olympia weight plate was produced according to the latest manufacturing standards. The high quality pure polyurethane has an elasticity which is very insensitive and resistant to abrasion, chipping and any kind of external influences such as scratches or impacts. The material of the pure polyurethane is liquid when heated and can be produced in every imaginable colour according to customer specifications. Polyurethane, also called CPU, is absolutely odourless and more durable than a dumbbell with a rubber coating.

Features:
» 2-handle design for easy handling.
» 50.5 mm stainless steel ring.
» Silk matt surface with high-end finish.
» Weight deviation with a tolerance of +/-1%.
» Available in weight sizes 1.25 / 2.5 / 5.0 / 10.0 / 15.0 / 20.0 and 25,0 kg.

Material: steel with polyurethane coating
Colour: black / blue

Item weight Item weight
LP8023-1.25 1,25 kg LP8023-15 15,0 kg
LP8023-2.5 2.5  kg LP8023-20 20,0 kg
LP8023-05 5.0  kg LP8023-25 25,0 kg
LP8023-10 10,0 kg

URETHANE CHANGE PLATE

ITEM LP8028

The Fractional Weight Plates are the optimal addition to the Competition Bumper Plate of any kind to ensure the fine gradation below 5,0 kg. They are mainly used for power lifting, weight lifting and cross training. The inner ring allows a fast and safe loading and unloading of the plates on any Olympia barbell.

Features:
» Inner ring with a 50.5 mm socket.
» Silk matt surface with high-end finish.
» Weight deviation with a tolerance of +/-1%.
» Available in the weight sizes 0.5 / 1.0 / 1.5 / 2.0 / 2.5 and 5,0 kg.

Material: Polyurethane, CPU
Colour: Colour coded

Item color weight Item color weight
LP8028-0.5 0.5 kg LP8028-02 blue 2,0 kg
LP8028-01 green 1,0 kg LP8028-2.5 red 2.5 kg
LP8028-1.5 yellow 1.5 kg LP8028-5 5,0 kg

PULLING BLOCK

ITEM LP6010

Stackable pulling bloack is widely used in training, so it requires high durability and stability of the box. This upgraded pulling block is made of plywood, and the top is covered with high-density rubber, resulting in higher grip and increased anti-skid performance, which gives trainers more confidence.

-The top rubber has better skid resistance
-Height can be adjusted freely
-Size: 60x45x7.5/12.5/17.5cm

LIVEPRO ELITE COLORED RUBBER BUMPER PLATE

ITEM LP8332

— Tolerance: +/-1%
— Made with new virgin rubber
— Better abrasion resistance, and more elasticity
— The thickness of the rubber layer is 28-91 mm

RUBBER GRIP PLATE

ITEM LP8330

— Available in a number of weights for dierent strengths
— Precision casting
— 50mm collar opening
— Impact resistant with reduced noise on drop
— Black Matte Finish
— Material: steel + rubber
— Olerance:+/-1%

BLACK HIGH ELASTICITY BUMPER PLATE

ITEM LP8026

The Rubber Granule Bumper Plate has a flanged inner ring made of stainless steel, which allows a fast and safe loading and unloading of the discs on any Olympia barbell. Due to the full rubber coating of the weight plate and a Shore A hardness of 90, every surface is perfectly protected against impact.

Features:
» Chrome-plated inner stable ring with a 50.5 mm socket.
» Each weight size has a diameter of 450,0 mm according to IWF standard.
» Weight deviation with a tolerance of +/-1%.
» Tested with 20.000 impact repetitions.
» Available in weight sizes 5.0 / 10.0 / 15.0 / 20.0 and 25,0 kg.

Material: 100% natural rubber
Colour: black / colour coded

Item color weight
LP8026-05 white-black 5.0 kg
LP8026-10 10,0 kg
LP8026-15 bright-yellow-black 15.0  kg
LP8026-20 blue-black 20,0 kg
LP8026-25 shiny-red-black 25.0  kg

URETHANE DOUBLE COLORED ELITE BUMPER PLATE

ITEM LP8027

-Precision casting
-Large hard chrome hubs
-Premium urethane surface coating
-Diameter: 450mm(IWF standard)
-Diameter of holes:50mm
-Fall test: 30,000 times

5′ OLYMPIC BAR

ITEM LP8082

» Material: High carbon steel
» Medium knurling with good grip.
» Weight distribution on 2 ball bearings and 2 bushings.
» Tensile strength measured at 140.000 PSI.
» Can support a load of up to 250,0 kg.

Dimensions:
» Length: 150,0 cm.
» Recording length: 25,0 cm
» Handle diameter of 28,0 mm.

Weight: 13.5 kg
Colour:
» Recording: Chrome
» Handle: Chrome

Item Weight Material Shaft
diameter
Length Loadable
Sleeve Length
Knurl Tensile
Strength
Tested Sleeve Rotation
LP8082 13.5 kg 45# 28,0 mm 150,0 cm 25,0 cm Dual kunrling 1.2mm 140k PSI 600LBS Needle bearing x 2, Bushing x 2

LANDMINE HOME BASE

ITEM LP8185

The Core Plate provides the rotation muscles of the upper body with the help of a barbell and additional weight plates and simultaneously strengthens the entire torso muscles with various exercises such as T-Bar rowing or the pushing from shoulder level. The strengthening and stability of the entire upper body is improved. It is easy to carry and can be used independently indoors or outdoors.

Characteristics:
» Material: Steel with powder coating
» Dimension:
» Length: 45,0 cm
» Width: 45,0 cm
» Height: 10,0 cm
» Taking from olympia barbells.
» Weight: 18,0 kg
» Colour: Black
» Assembly required.

JUNIOR TECHNIQUE BAR

ITEM LP8083

Features:
» Material: Aluminium
» Medium knurling with good grip.
» Weight distribution on 2 ball bearings.
» Tensile strength measured at 42.000 PSI.
» Can support up to 20,0 kg.

Dimensions.:
» Length: 130,0 cm.
» Recording length: 10.5 cm
» Handle diameter of 22.2 mm.

Weight: 2.5 kg
Colour:
» Recording: Blue
» Handle: Black

Item Weight Material Shaft
diameter
Length Loadable
Sleeve Length
Knurl Tensile
Strength
Tested Sleeve Rotation
LP8083 2.5 kg Alumimum 22.2mm 130,0 cm 10.5 cm 1.0mm 42k PSI 40LBS Ball Bearing x 2

4′ OLYMPIC BAR

ITEM LP8054

Features:
» Material: High carbon steel
» Medium knurling with good grip.
» Weight distributed over 4 bushings.
» Tensile strength measured at 110.000 PSI.
» Can support up to 200,0 kg.

Dimensions:
» Length: 120,0 cm.
» Recording length: 17,0 cm
» Handle diameter of 28,0 mm.

Weight: 10,0 kg
Colour:
» Recording: Chrome
» Handle: Chrome

Item Weight Material Shaft
diameter
Length Loadable
Sleeve Length
Knurl Tensile
Strength
Tested Sleeve Rotation
LP8054 10,0 kg A3 28,0 mm 120,0 cm 17,0 cm Dual kunrling 1.2mm 110k PSI 500 LBS Bushing x 2 Bearing x 2

4′ OLYMPIC CURL BAR

ITEM LP8053

Features:
» Material: High carbon steel
» Medium knurling with good grip.
» Weight distribution on 2 ball bearings and 2 bushings.
» Tensile strength measured at 110.000 PSI.
» Can support up to 250,0 kg.

Dimensions:
» Length: 120,0 cm.
» Recording length: 17,0 cm
» Handle diameter of 28,0 mm.

Weight: 10,0 kg
Colour:
» Recording: Chrome
» Handle: Chrome

Item Weight Material Shaft
diameter
Length Loadable
Sleeve Length
Knurl Tensile
Strength
Tested Sleeve Rotation
LP8053 10,0 kg A3 28.0  mm 120,0 cm 17,0 cm 1.2 mm 110K PSI 500LBS Bushing x 2, Bearing x 2

LOADABLE DUMBBELLS

ITEM LP8084

Features:
» Material: High carbon steel
» Medium knurling with good grip.
» Weight distributed over 4 needle bearings.
» Tensile strength measured at 110.000 PSI.
» Capable of supporting up to 250,0 kg.

Dimensions:
» Length: 51.5 cm.
» Recording length: 17,0 cm
» Handle diameter of 28,0 mm.

Weight: 5.8 kg
Colour:
» Recording: Chrome
» Handle: Chrome

Item Weight Material Shaft
diameter
Length Loadable
Sleeve Length
Knurl Tensile
Strength
Tested Sleeve Rotation
LP8084 5.8 kg A3 28,0 mm 51.5 cm 17,0 cm 1.2mm 110k PSI 500 LBS Needle bearing x 4

DUFFALO BAR

ITEM LP8305

This Olympic weightlifting bar is 1.2 meters in length, which is also more suitable for beginners to train. Its material is high-quality alloy steel, with excellent strength, toughness, wear resistance and corrosion resistance. The bar sleeve is electroplated to enhance the hardness. The electroplating treatment on the grip looks more beautiful and smooth, and the double knurling design on the grip effectively increases the friction between the hand and the bar to improve hand grip.

T-BAR HANDLE

ITEM LP8186

Often the Battle Rope lies on the training floor after the use of the training and blocks the further course of the workouts. Our storage wall bracket ensures order. A Battle Rope of any length can be stored on the wall.

Characteristics:
» Material: Steel with powder coating
» Colour: Black

HEX BAR

ITEM LP8309

The hex bar is made from high quality Q235 steel, the bar has higher strength and toughness, its weld- ability is better and it is more resistant to corrosion and not easy to rust. The two sets of knurling are designed to add aesthetic appeal and improve hand grip. During a workout, athletes can easily switch from one set of handles to another by simply flipping the bar over. the 6 side frame hard puller is very friendly to the lower back and is suitable for beginners.

— Tolerance: +/-1%
— Made of high quality steel material
— Extended handle design
— Two knurled designs

— Weight: 23.5kg
— Dimensions: 182 x 65 x 14.5cm

FUNCTIONAL TRAP BAR

ITEM LP8310

The Open Hexagonal Frame Deep Squat Hard Pull Bar is designed for strength training and weightlifting, allowing hard pulling and shrugging exercises to be performed safely without the friction and stress of the bar. It is an improvement on the traditional hexagonal frame with a small but very important change that makes it very powerful and allows the trainer to enter and exit training mode freely. The knurled design on the handle provides a firm grip for a safer workout.

— Tolerance: +/-1%
— Made of high quality Q235 steel
— Corrosion resistant
— Knurled handle design for a stronger grip
— Tilted handle design
— Open design

— Dimensions: 212 x 60 x 15cm
— Load capacity: 700LB

BARBELL CUSHION

ITEM LP8320

The barbell cushion is a product designed for weightlifting and powerlifting, which can greatly reduce the sound and vibration when the barbell falls and protect the barbell very well.Bottom anti-slip fabric increases the stability of the barbell table to ensure that the mat will not easily move when the barbell falls, which is very practical for both gym and home fitness.

— High-quality PVC wrapping
— High-density recycled cotton filled
— Design with handles on two sides
— Anti-slip fabric at the bottom

— Mat: PVC+ recycled cotton
— Weight: 22kg/pair
— Size: 76×60×15cm

SINGLE HANDLE

ITEM LP8187

The floor, wall and ceiling anchor is suitable for attaching a battle rope or climbing rope. The stable shape ensures a load of 200,0 kg.

Characteristics:
» Material: Steel with powder coating
» Colour: Black

TRICEP BAR

ITEM LP8059

The bar is a solide triceps barbell made of steel with olympic weight plate support with neutral grips (the palms of the hands are facing each other), which can be used for training the triceps, biceps and the lower arms.

Characteristics:
» Material: hard steel chromed
» Medium knurling with good grip.
» Weight distribution on 2 ball bearings and 2 bushings.
» Can support up to 100,0 kg.

Dimensions:
» Length: 86,0 cm.
» Sleeve length: 17,0 cm
» Handle diameter: 25,0 mm.

Weight: 10.6 kg
Colour: silver

MULTI-GRIP BAR

ITEM LP8301

The newly designed, fully welded bar is one of the few multi-handle barbells in the industry with knurled handles. This versatile barbell is a must for powerlifters and other athletes who want to train a neutral grip for increased explosive power or reduce the strain on the shoulders.

Characteristics:
» Material: profile steel with powder coating, sleeve chromed
» Medium knurling with good grip.
» Fully welded design.
» Loadable up to 250,0 kg.

Dimensions:
» Length: 200,0 cm.
» Sleeve length: 31.5 cm
» Handle diameter: 30,0 mm.

Weight: 15,0 kg
Colour: black / silver

LOG BAR

ITEM LP8302

Characteristics:
» Material: steel with powder coating, sleeve chromed
» Medium knurling with good grip.
» Fully welded design.
» Loadable up to 350,0 kg.

Dimensions:
» Length: 190,0 cm.
» Sleeve length: 31.5 cm
» Handle diameter: 40,0 mm.

Weight: 40,0 kg
Colour: black / silver

SAFTY SQUAT BAR

ITEM LP8303

Characteristics:
» Material: steel with powder coating, sleeve chromed
» Medium knurling with good grip.
» Fully welded design.
» Loadable up to 350,0 kg.

Dimensions:
» Length: 190,0 cm.
» Sleeve length: 31.5 cm
» Handle diameter: 40,0 mm.

Weight: 40,0 kg
Colour: black / silver

JERK BOX

ITEM LP8816

The LIVEPRO Jerk Blocks support the athlete in learning and improving the Clean and Jerk. The blocks can also be used for increased deadlifts, step-ups or box jumps. The 4 different heights of the blocks allow to store the training weight in 8 different heights. The block with the lowest height should always be used as the top block.
Made of 20 mm structural plywood they are able to withstand heavy loads. Each level has its own set of roller blocks at each end, so dropping the barbell safely is no problem, it will not roll.

Characteristics:
» Material: Wood
» Can support a load of 500,0 kg.

Dimensions:
» Base dimensions: 91.5 x 51,0 cm.
» Block heights: 38.0 / 30.0 / 15.0 and 6,0 cm
» Material thickness: 20,0 mm

Weight: 160,0 kg
Colour: brown

MULTI-GRIP BAR

ITEM LP8311

The LIVEPRO Jerk Blocks support the athlete in learning and improving the Clean and Jerk. The blocks can also be used for increased deadlifts, step-ups or box jumps. The 4 different heights of the blocks allow to store the training weight in 8 different heights. The block with the lowest height should always be used as the top block.
Made of 20 mm structural plywood they are able to withstand heavy loads. Each level has its own set of roller blocks at each end, so dropping the barbell safely is no problem, it will not roll.

Characteristics:
» Material: Wood
» Can support a load of 500,0 kg.

Dimensions:
» Base dimensions: 91.5 x 51,0 cm.
» Block heights: 38.0 / 30.0 / 15.0 and 6,0 cm
» Material thickness: 20,0 mm

Weight: 160,0 kg
Colour: brown

BARBELL COLLARS

ITEM LP8061

Characteristics:
» Can be used with any Olympic bar with 50 mm attachment.
» Rubber inlay protects the bar from damage and provides a secure grip.
» Fastener made of break-proof plastic with locking clamp mechanism.
» Hexagonal design with an outer dimension of 80,0 mm.
» Colour: black

BARBELL COLLARS

ITEM LP8062

Characteristics:
» Can be used with any Olympic bar with 50 mm attachment.
» Rubber inlay protects the bar from damage and provides a secure grip.
» Fastener made of break-proof plastic with locking clamp mechanism.
» Hexagonal design with an outer dimension of 70,0 mm.
» Colour: black / Blue

5 BARBELL RACK

ITEM LP8852

OLYMPIC BAR HOLDER

This 5 barbell rack is the ideal Olympics bar storage solution for gyms, whether you are in a commercial health club or a home gym. The metal frame with a matte black finish looks very textured and it combines an aesthetically pleasing design with high-quality materials for an overall aesthetic look. Wide support provides additional stability with rubber legs at the bottom to protect the floor from scratches.

— With pipe being 2mm thick with seamless welding technology
— Black frosting sprayed
— Protect the ground and be anti-slip
— Used for Olympics bar
— It covers a small area and optimally uses floor space

— Size: 85L×70.5W×131H(cm)
— Weight: 34.5kg
— Assembly required

VERTICAL PLATE AND BAR TREE

ITEM LP8851

OLYMPIC PLATE TREE AND BAR RACK

Olympic peak bell piece and weightlifting pole frame are the ideal bell piece and Olympic pole storage solutions for gyms, whether you are a commercial fitness club or a home gym. The metal frame with black matte surface is very textured, and the overall appearance is beautiful and atmospheric. Wide support for extra stability, with rubber feet at the bottom to protect the floor from scratches.

—3mm thick pipe, seamless welding technology, stable and durable
—Black frosted spray coating increases corrosion resistance and is not easy to rust
—The bell piece storage rod is hard chrome plated, smooth and not easy to rust
—The leather ring at the connection between the cross bar and the main bar effectively protects the bell blade from scratching
—The rubber support foot of the base provides effective protection

—Pin size: 100×50×2mm
—Rube thickness: 2mm
—Diameter of bar spigot tube: 60mm
—Diameter of bell piece hanging rod: 48mm
—Total length of bell piece hanging rod: 65cm
—Product size: 68L×66.5W×131H(cm)
—Weight: 24kg
—Assembly required

9 BAR HOLDER

ITEM LP8874

9 OLYMPIC BAR FLOOR STAND

This 9 bar holder is the solution for storing the Olympics bars in the gym. Because the Olympics bars are round and roll easily on the floor, which is the ideal solution to keep the gym floor neat and orderly and the safety of Olympics bars. 6.5mm thick metal steel frame with black matte finish looks very quality. The stand is designed with nine 51mm inner diameter Olympics bars jacks, which makes it easy to store the rod vertically and safely.

–With 6.5mm thick pipe, with seamless welding technology
–Black frosting sprayed
–Vertical storage is designed, covering a small area
–Protect the ground and be anti-slip

–Size: 44L×44W×16.5H(cm)
–Weight:21kg

10 BARBELL RACK

ITEM LP8853

BARBELL RACK

This barbell rack is the ideal barbell storage solution for gyms, whether you are in a commercial health club or a home gym. The metal frame with a matte black finish looks very textured and it combines an aesthetically pleasing design with high-quality materials for an overall aesthetic look. Wide support leg provides additional stability with rubber legs at the bottom to protect the floor from scratches.

— With 2mm thick pipe, with seamless welding technology
— Black frosting sprayed
— Protect the ground and be anti-slip
— Used to store up to 10 barbells

— Size: 83L×85W×125H(cm)
— Weight:56.5kg
— Assembly required

10 BARBELL RACK

ITEM LP8904

BARBELL RACK

The black matte surface on the metal frame looks very textured.Made of durable metal steel material, not easy to rust, beautiful and atmospheric.The perfect combination of triangle and arc can provide higher stability and load-bearing capacity. It is currently the perfect ring storage rack on the market.

— Size: 70.4Lx67.6Wx88.3H(cm)
— Assembly required

VERTICAL PLATE HANGER

ITEM LP8893

The 3 mandrels at equal intervals allow Olympia and Bumper weight plates to be stored on the wall to save space. The holder can be attached to the wall vertically, horizontally and diagonally as desired. The mounting height is freely selectable and thus offers the comfort of removing or loading the weight plates at a comfortable height. Rubber stoppers prevent the weight plates from coming into contact with the wall.

Characteristics:
» Material: sheet steel with powder coating
» Dimensions:
» Width: 120,0 cm
» Depth: 24.7 cm
» Height: 6.4 cm
» Weight: 9,0 kg
» Colour: black
» Wall mounting required.
» Delivery follows without weight plates.

HORIZONTAL PLATE RACK

ITEM LP8900

The metal frame and the black matte surface look very textured.It combines beautiful design and high-quality materials, and the overall beautiful atmosphere.The wide support feet provide extra stability.There are rubber feet on the bottom to protect the floor from scratches.

— Size:130.4L×38.6W×30.6H(cm)
— Assembly required

6 BAR GUN RACK

ITEM LP8812

This space-saving storage allows 6 commercial bars to be stored horizontally on the wall. The two elements can be mounted in any individual distance, so that even shorter barbells with small internal dimensions can bestored. A plastic track protects the surface coating and knurling of the bar.
Characteristics:
» Material: sheet steel with powder coating
vDimensions:
» Length: 98,0 cm
» Width: 12.5 cm
» Height: 5,0 cm
» Weight: 9.5 kg
» Colour: black
» Wall mounting required.
» Delivery follows without barbells.

PLATE AND BAR STORAGE SET

ITEM LP8894

This wall-mounted solution is space-saving and perfect for storing of Olympia weight plates and Olympia bars. The strategically located plate holders allow even bumper plates with identical outer diameters to be sorted away properly, which is ideal for cross boxing and weight lifting platforms positioned close to the wall. Three bars of different lengths can be stored in the tubes configured with plastic sleeves. The protective sleeves prevent the barbell coating from being scratched.

Characteristics:
» Material: square steel / steel tube with powder coating
» Dimensions:
» Width: 100,0 cm
» Depth: 40,0 cm
» Height: 181,0 cm
» Weight: 28,0 kg
» Colour: black
» Wall mounting necessary.
» Delivery follows without bars and weight plates.

VERTICAL BAR HANGER

ITEM LP8891

This space-saving storage allows 3 standard barbells to be stored upright at the wall. The two elements can be mounted at any individual distance, so that even shorter barbells with small internal dimensions can be stored. A plastic track protects the surface of the bar.

Characteristics:
» Material: sheet steel with powder coating
» Dimensions:
» Width: 32,0 cm
» Depth: 8.7 cm
» Height: 10.6 cm
» Weight: 6.5 kg
» Colour: black
» Wall mounting necessary.
» Delivery without bars.